Liaocheng Beike New Materials Technology Co., Ltd. was established in November 2021, with a registered capital of 50 million yuan. It is a comprehensive enterprise focusing on the research and development, manufacturing, and promotion of high-end intelligent prefabrication, as well as the research and development of new materials. The company takes steel structure as its core and continuously promotes the integration and application of prefabricated buildings and new material technologies, aiming to provide more efficient and reliable solutions for industrial buildings, multi-story and complex structures, space steel structures, municipal bridges, intelligent logistics systems, coal chemical and new energy, nuclear power projects, and overseas projects.

Relying on a large-scale manufacturing foundation and continuous investment in research and development capabilities, Beike has built a 200,000-ton annual production high-end intelligent prefabrication research and manufacturing base, covering an area of over 200 acres. It has 5,000 square meters of office and R&D center, 45,000 square meters of first-phase intelligent processing workshop, and 65,000 square meters of second-phase high-end intelligent workshop. It has the comprehensive manufacturing capacity of 200,000 tons of various prefabricated products per year. Such a production layout enables the company to simultaneously meet the dual demands of standardized production and customized project delivery.

In terms of technology system construction, the research and technology center of Beike uses PKPM, 3D3S, Midas, Sap2000 and other international advanced structural design software for multi-story, large-span and complex structure design, and uses Tekla for three-dimensional solid deepening design. At the same time, it has the application ability of BIM in the entire project life cycle. Through the integrated technical path of "design - deepening - manufacturing - delivery", Beike continuously improves the collaborative efficiency and implementation ability of complex steel structure projects.

In terms of qualifications and management systems, the company has obtained multiple construction qualifications such as Grade II Construction General Contracting and Grade I Special Contracting for Steel Structures, and has passed quality, safety and environmental protection system certifications. At the same time, Beike actively practices the concept of green manufacturing, adopting magnetic microwave technology, photolysis technology, spray tower ozone treatment, bag-type dust removal and other technical means, and has established a complete environmental control system covering smoke, VOCs waste gas and processing dust treatment, continuously promoting the green and standardized nature of the manufacturing process.

At present, Beike has formed a development positioning centered on high-end intelligent prefabrication solutions, continuously deepening around "manufacturing capacity, technical capacity, project capacity, and service capacity", and striving to create greater value for partners. The company adheres to more professional technology, more stable quality and more efficient delivery to promote the continuous development of the new material and prefabrication construction industry, and sincerely welcomes global industry colleagues and friends to come for exchanges and guidance.

We do not merely position ourselves as a steel structure processing factory, but as a long-term project partner. We assist overseas purchasers in advancing the project from the conceptual and drawing stage to the stages of detailed design, manufacturing, export packaging, shipping coordination, and project support. The core objective is to make remote procurement clearer, more reliable, and more trustworthy.

Our manufacturing base is constructed with a focus on scale, delivery speed, and project continuity. According to the company's official website, Beike has a high-end intelligent prefabrication R&D and manufacturing base with an annual production capacity of over 200,000 tons. It covers an area of more than 200 acres, equipped with 5,000 square meters of office and R&D facilities, 45,000 square meters of the first-phase intelligent processing workshop, and 65,000 square meters of the second-phase high-end intelligent workshop. This manufacturing foundation enables us to not only support the production of standardized products but also undertake the delivery of customized projects.

This scale is crucial for overseas procurement, as the project party does not merely evaluate the price; they also consider whether the supplier has sufficient production capacity depth, scheduling capabilities, organizational stability, and the ability to deliver large or technologically complex projects on time. Our manufacturing base is precisely the essential foundation that enables us to simultaneously support repetitive products and custom-engineered steel structures.

Our Engineering Team

Our engineering strength is built on a professional technical system rather than on fabrication alone. The company’s technical center uses PKPM, 3D3S, Midas, SAP2000, and Tekla for structural design and 3D detailing, while also applying BIM across the project lifecycle. This indicates an engineering workflow that covers design, optimization, detailing, coordination, and manufacturing preparation rather than simple shop fabrication only.

Based on these capabilities and the range of project categories shown on the company website and profile, our engineering team supports multi-storey and complex steel structures, space structures, municipal bridges, high-clean industrial plants, logistics systems, energy and chemical steel structures, nuclear projects, and overseas works. That means we are able to organize technical communication around structure logic, detailing depth, manufacturing feasibility, and delivery execution in a much more project-oriented way.

Overseas Project Experience

Our overseas project experience covers various fields such as energy, industrial parks and bridge engineering. Taking the fully enclosed steel mesh structure project of the coal yard at the Koswangan thermal power station in the Philippines as an example, this project adopted a dome shell structure, with a total steel usage of 13,000 tons, a length of 360 meters, a span of 110 meters, a height of 45 meters, and a construction area of 40,000 square meters. The enterprise materials clearly state that this project was contracted under the EPC model, demonstrating our comprehensive advantages in design, manufacturing and supply, as well as construction and installation integration operations.

In the Tal 2×330MW CFB power station project in Pakistan, the project includes boiler steel structure and main plant structure, with a total steel usage of 13,000 tons, and the thickest steel plate reaching 150mm, reflecting our manufacturing and delivery capabilities in heavy energy engineering steel structures.

We also have the Taptapani Bodicoxi River Bridge project in Nepal, which adopts a 90-meter simply supported equal-height steel truss structure, with a steel usage of approximately 870 tons; and the JIMA Industrial Park project in Ethiopia, where we undertook the processing, transportation and installation of 25,000 square meters of steel structure factory buildings. This shows that our overseas project capabilities are not limited to a single industry, but cover multiple fields such as bridges, energy and industrial buildings, and we are your reliable partner.

Our Service System

Our service system is built around the full project chain. In practical terms, this typically includes demand clarification, technical communication, drawing review, detailing coordination, fabrication preparation, manufacturing, inspection, export packing, shipment coordination, and project follow-up. The reason this matters is simple: overseas steel structure purchasing fails more often from broken handoffs than from steel itself.

We therefore emphasize a connected workflow rather than separated tasks. The goal is to reduce the gap between what is discussed, what is drawn, what is fabricated, and what finally reaches site. That connected workflow is one of the key reasons we can support customized overseas projects more reliably.

Why You Can Feel More Confident Working With Us

Trust in overseas suppliers does not merely come from the statement "We have experience", but must be based on visible capabilities. According to the publicly available information on the official website, Beike has a registered capital of 50 million yuan, possesses a manufacturing base of over 200 acres, an annual production capacity of over 2 million tons, and has qualifications such as Grade II general contracting for construction projects and Grade I professional contracting for steel structure projects. It has also passed the certifications for quality, safety, and environmental protection systems.

Trust also comes from technical depth. The enterprise information shows that Beike has obtained 21 authorized patents, including 2 invention patents and 19 utility model patents. It has successively compiled or participated in the formulation of 7 industry and provincial standards, and has received the Innovation Award and the Science and Technology Progress Award. These pieces of information cannot replace the delivery results, but they are sufficient to show that we do not merely pursue production volume, but are continuously building genuine technical capabilities.

At the same time, we welcome you to come to our company to deeply discuss your project. We welcome friends from all over the world!

FAQ 1: Do you only supply steel members, or can you support the whole project process?

We don't just sell steel components. We support a more comprehensive project process, including technical communication, drawing review, detailed coordination, manufacturing, inspection, export packaging, shipping coordination and project follow-up. We offer a professional service system to provide you with a reliable partner for your project.

FAQ 2: Can you support customized overseas projects instead of only standard products?

Our company is positioned as a "provider of high-end intelligent prefabricated solution services", rather than merely a supplier of standard products. By integrating the design software system, BIM capabilities, and the industrial buildings, bridges, logistics systems, energy steel structures, spatial structures and overseas projects showcased on our website, the company possesses the organizational and delivery capabilities for customized projects.

FAQ 3: What gives confidence that your engineering team is strong enough?

The strongest evidence is the technical platform and project range. The company uses PKPM, 3D3S, Midas, SAP2000, Tekla, and BIM across the lifecycle, and its case presentation covers high-rise complexes, bridges, energy projects, nuclear structures, logistics systems, and overseas works. That combination suggests a mature engineering workflow rather than a simple fabrication-only model.

FAQ 4: Can you handle large and technically demanding projects?

We have an engineering team of over 100 people and possess the capacity for steel structure production. The projects we have completed include: an ultra-high-rise complex project with a total steel usage of 20,000 tons, an overseas energy project with a total steel usage of 13,000 tons, a large-scale passenger terminal steel structure project of 126,000 square meters, and a nuclear power steel structure project that requires a specialized quality assurance system. Therefore, we can meet any of your requirements.

FAQ 5: What makes your manufacturing system more reliable?

The company has a large physical manufacturing base, intelligent workshops, annual output above 200,000 tons, and certified management systems covering quality, safety, and environment. It also maintains a green manufacturing control system for emissions, VOCs, and dust management. These are practical indicators of organized production rather than small-scale manual fabrication.

FAQ 6: Why should we choose Beike instead of a lower-priced supplier?

Because in steel structure export projects, the hidden cost usually comes from inconsistency, not only from the quote. If drawings are unclear, fabrication is unstable, packing is disorganized, or follow-up stops after the first order, the project can become much more expensive later. Beike’s advantage is not only scale, but the combination of engineering tools, manufacturing base, qualifications, and overseas project experience.

At Beike, we believe overseas steel structure cooperation should not feel uncertain. It should feel organized, visible, and dependable. From customized engineering solutions to fabrication and export delivery, we are committed to helping every project move forward with greater clarity, stronger technical support, and more confidence.